For Surveyors who prefer using Rebar as a survey stake, we offer our REBAR MARKERS. Each MARK-IT MARKER is a permanent marker designed for use where 3/8", 1/2", 5/8" or ¾" rebar is used as a survey stake. MARKERS adhere easily and securely when installed by several strikes of a hammer.
1-1/2" diameter flat top cap for 1/2" (#4 rebar)
Please choose one of the stamping forms above and enter the text you would like printed in the boxes provided beside the chosen stamping form.
Drive Rebar to desired depth with Rebar Driver (optional item). Using a soft face hammer, tap the Survey Marker onto the Rebar. Two or three hammer strikes will secure your Marker on the Rebar. If using a steel hammer, place a block of wood or piece of leather between the Marker and hammer to protect your logo. A Driving Cap is also available as an optional item.
Insuring a proper fit on rebar
Be sure that there are no large burrs, or mushrooming on the one end that will receive the Marker. We suggest you file or grind the burrs off before taking the rebar into the field. Rebar drivers are available to eliminate any mushrooming of rebar during the driving application.